Pest Control &

Pest Control &


Get a
Call now

Marble Crystallization

The stone crystallization is a method of marble polishing which improve its surface aspect.

A single-plate machine and steel wool allows the sandpapering of the marble. Crystallization protects the marble while preserving the color and the brightness of the stone.

Crystallization utilizes a special polishing machine and a chemical agent that restores the marble to its original luster. This system actually polishes the surface of the marble itself, leaving no chemical residue that requires stripping. There is nothing left on the surface of the marble to yellow or peel.

Crystallization is not only cost-effective, it is low in maintenance. The process hardens marble surface and make it scuff and stains resistant. The term crystallization has entered the language of the marble polishing field to describe a process used polish and maintain a shine on marble surfaces. The crystallization process consists of spraying a fluid onto the marble floor and buffing it in with steel wool under a buffing machine.

The steel wool generates heat through abrasion and the chemical reacts with the marble, producing a new compound on the surface of the stone. This procedure protects the surface of the stone, adds shine and may even harden the stone, increasing its wear.


The high shine observed on stone is the result of smoothing it with fine abrasives. Most will use diamond abrasives to hone the stone, then switch to a powdered abrasive to achieve the final polish. The abrasive powder is worked into the stone with a floor machine using water and cloth or polyester fiber pads. The powder is worked into a slurry until a polish is achieved.

Removing the slurry with a wet VAX or mop and rinses the floor to remove excess powder. It is a relatively simple procedure, but requires a great deal of practice.

What is crystallization?

Crystallization is a chemical transformation of the floor surface, similar to the conventional polishing of marble at the factory. A portable machine incorporates the polishing compounds on a clean, dry surface (stripped of wax or sealer) to produce a renewed floor surface.

Who uses crystallization?

Crystallization is for indoor use only and finds practical application at all levels. In professional and public buildings, malls, offices, hotels and private homes.


Grinding is the process by which the surface is sanded by the use of abrasives (diamond discs) to remove large stocks of the stone. This process is usually recommended when stone tiles contain lip page (uneven tiles). It is also recommended when deep stains and scratches occur or when one desires a completely floor.

Honing is the process of smoothing the stone with the use of abrasives (diamond discs). Honing is performed to remove scratches but will not remove lip page (uneven tiles). It can, however, round the edges of the stone, giving a smoother finish to the edge.

Our Cleaning Services

Send Request

© Copyright All rights reserverd by BBM Group
Powered by Mizmar Technologies and ERP Software Development